Comprehensive Installation Guide for a New Shower Unit

Comprehensive Installation Guide for a New Shower Unit

Blog Article

Further Details

We have come across this great article relating to How to Install a Freestand below on the web and felt it made perfect sense to share it with you on my blog.

How to Install a Direct-to-Stud Shower Enclosure
A successful shower setup requires careful planning as well as a lot of work. For the most part, you will certainly require to do 3 sorts of jobs: mounting walls, installing the plumbing, and finishing walls.

Different Sorts Of Shower Units

  • Push-on Mixer: The hose as well as spray parts of the push-on mixer shower unit can be attached to the bathroom tap according to your need, and also the water temperature can be adjusted through the taps. Push-on mixers are cheap as well as very basic to set up. Nonetheless, although the pipe connection is basic, it is easily displaced. In addition, it is bothersome to change the temperature level.

  • Bath/Shower Mixer: The pipe as well as spray of this type of shower are integrated with a bath mixer tap, and also the temperature level can be readjusted through the bath faucets. It is an extremely inexpensive choice and also no added plumbing is involved. Nevertheless, the bath/shower mixers likewise deal with inconvenient temperature control alternatives.

  • Manual Mixer: The tube and spray of a hand-operated mixer shower system are a part of the wall device and also the cold and hot water materials are linked to a solitary valve The temperature level and pressure of the water are controlled with either one or a range of knobs (in more pricey showers). Although temperature level control is much easier in manual mixer types, they are extra pricey than the formerly mentioned mixers. They additionally need additional plumbing of cold and hot water system pipes.

  • Thermostatic Mixer: The tube and spray of this shower kind belong of the wall system as well as the hot and cold water products are linked to a solitary valve below also. It is full with an integrated stabiliser to self-adjust the water temperature level and to prevent it from ending up being also hot. Among the biggest advantages of a thermostatic mixer shower kind consists of convenient temperature control. However, it is one of the most expensive of the various mixer options.

  • Power Shower: A power shower is a solitary device including an effective electrical pump that is capable of changing both the water stress and also temperature. This kind of shower can be fitted if there is water from a cold water cistern as well as a warm water cylinder. A power shower makes the modification of both stress and temperature simple. On the other hand, it is unsuitable for water heated directly by the shower or where the water is provided by a combination boiler under keys stress.

  • Electric Shower: An electrical shower is plumbed right into a mains cold water supply and also it heats the water electrically. It is very important to keep in mind that for this shower type to be mounted, the keys stress requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The system permits the temperature level and pressure to be adjusted through a handle. Designs with temperature level stabilisers are much better as they continue to be untouched by various other faucets in other places in operation within the household. A major drawback of electric showers is that the control handle just permits the alternative of high temperatures at much less pressure, or lower temperatures at a higher pressure. This is troublesome in the winter season when the spray is commonly weak and also the keys water is chillier. Nonetheless, this trouble is taken on in some versions which are readily available with a winter/summer setup.

  • A Lot Of Typical Errors

  • Breaking or disregarding local code constraints.

  • Making use of pipelines that are as well little.

  • Attaching copper to galvanized without using a brass or dielectric suitable in between both.

  • Not using tape or pipe compound at threaded joints.

  • Not leveling your fixtures when mounting them.

  • Not setting up an air space filling for components.

  • Reducing supply stub outs as well short to mount the shutoff valves onto after the completed wall is in area.

  • Not effectively straightening tubing right into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubing goes to an angle will trigger a leakage.).

  • When turning the water back on in your home, constantly run the outdoors tube shutoff or flush your toilets to bleed dirt and also air from the lines. This particles can cause problems in your sink faucets as well as other plumbing trim.

  • Preparation.

    To start with, you have to select the sort of shower that you want to set up. It is necessary to establish whether the picked shower is capable of managing particular systems and can regulate a risk-free level of water via the central heating boiler. Many shower systems nowadays are designed to be flexible to various water pressures (such as saved hot water and also chilly keys).
    It is also vital to take into consideration the water pressure as well as the preparation of the piping as well as water drainage for the shower.


    Depending on the kind of shower you wish to set up, the shower head must either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it has to have a check valve.
    Before beginning, it is recommended to note the positions of the shower head and also control, and also to prepare the pipe-work entailed. Furthermore, the water drainage system to eliminate the drainage will certainly need to be prepared. Both positions of the cable course and the shower button will likewise require to be considered if an immediate or electrical shower device is being installed.
    Utilize the guideline overview provided with the shower system to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is essential to remove the supply of water. In order to shield the pipes, they should be offered a water resistant covering as well as likewise fitted with separating shutoffs. The pipelines can then be hidden into the wall surface and also smudged over to neaten the overall look.
    Fit the base tray, shower head, and also fittings.
    Attach the primary shower control to the pipes that will certainly be supplying the water (This may need a female screw string adapter).
    Reconnect the water system as well as test the pipelines for any type of leakages, as some might need tightening.
    If you are installing an electrical shower, remember to switch off the electrical power supply before making any electric connections. When these links have been made (there ought to be advice within the instruction manual), the power supply can be switched back on.

    Readjusting Water Pressure to Fit Your Shower.

    The cold water reservoir can be lifted to a better height (sometimes as little as 150mm (6inches)) by fitting a solid wooden support under it - perhaps made up of struts and also blockboards. If you choose this option, the primary and circulation pipes will also have to be raised to satisfy the brand-new elevation of the reservoir.
    Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it has to be attached into the power supply in order to operate.

    Piping and Drainage.

    It is best to make use of 15mm size supply pipes, and make the runs to the shower as short and straight as feasible so as to maintain optimal pressure and minimise warmth loss. Furthermore, by reducing using elbow joints for pipe corners, you can decrease the resistance in the circulation of the water. You can attain this by flexing the pipes instead.

    Shower enclosures for bathrooms

    It makes your bathroom look like a luxury suite:

    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.

    Adds style to your bathroom:

    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.

    Enhances Personal Hygiene:

    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.

    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.

    Elevates your shower experience:

    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.

    Ensures safety with impressive safety features:

    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    How to Install a Freestanding Shower Unit

    Hopefully you enjoyed our section about How to Install a Freestand. Thanks a ton for taking a few minutes to read our content. Are you aware of somebody who is in to the niche? Please feel free to promote it. Many thanks for going through it.

    Get An Estimate

    Report this page